Automatic core blowing machine with vertical split of the core box, including moulding station, based on the Shell-Moulding process.
The mobile unit that holds the core box and the reservoir attached to the rods rotates 180° to spray at any point between the bottom and the top and to return to the bottom, tilting +/- 45° to make it easier to empty the cores, if required.
The machine is equipped with a direct flat spray reservoir and blowing head cooling system.
The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation. 
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle in addition to a hydraulic control unit to operate the cylinders while wheels with a chain and an inverter are used for the overturning operation.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.

OPTIONAL FEATURES:
- Belt with top-bottom vertical movement;
- Blower and detaching spray.